Hot strip

Hot strip

With its outstanding material properties, hot strip meets even the most stringent requirements, with respect to technological properties as well as surface quality and dimensional accuracy. These properties make hot strip an ideal material for processing and a large number of end products such as stampings and drawn parts, tubes, car wheels or even agricultural implements and shelf systems.

Downloads

Dimensions
  Wide/slit strip Blanks (e.g. rectangles, trapezoids1), etc.)
Thickness 1.00-16.00 mm 1.00-3.00 mm
Width 20-2,000 mm 200-2,000 mm
Length - 300-6,000 mm
Inside diameter 400/508 or 610 mm (± 20 mm) -
Outside diameter min. 800 mm, max. 2,000 mm -
Spec. coil weights 6-10 or 12-21 kg/mm strip width
Max. 23.5 kg/mm strip width on request
Coil weight max.36 t		 -
1)
Minimum feed 300 mm, angle range ± 35°.
Surfaces
Surface finish   Edge finish
pickled/unpickled   mill edges
skin passed/non-skin passed   cut edges
  rounded
Surface treatments  
oiled or unoiled  
Tolerances
Dimensional and shape tolerances to EN 10 051 (closer tolerances by arrangement).

→ Grades and mechanical properties