Cold-rolled sheet

Cold-rolled sheet

The benefits of cold-rolled strip compared to hot strip are better surface quality, good formability, closer tolerances and lower thicknesses. Cold-rolled flat products are versatile materials which can be used in many variations and numerous areas of application: in the automotive, enameling, tube and section, cask and construction industries and for sanitary facilities.

Downloads

Dimensions
  Wide/slit strip Blanks (e.g. rectangles, trapezoids3) , etc.)
Thickness 0.25 - 4.00 mm1)   0.40 - 3.00 mm
Width 7 - 2,000 mm   35 - 2,000 mm4)
Length -   35 - 6,000 mm5)
Inside diameter 400/500/508 or 610 mm2)   -
Outside diameter min. 800 mm, max. 2,000 mm   -
1)
Depending on steel grade and width.
2)
Smaller inside diameters on inquiry.
3)
Minimum feed 300 mm, angle range ± 35°.
4)
Depending on steel grade and thickness.
5)
Smallest dimension 35 x 300 mm (depending on steel grade and thickness).
Surfaces
Surface types to EN 10 130 Surface finish
A normal surface b   particularly smooth   < 0.40 μm
B improved surface g   smooth   < 0.90 μm
  m   matte   0.60 - 1.90 μm
Surface treatments r   rough   > 1.60 μm
oiled or unoiled
Tolerances
Dimension and shape tolerances to EN 10 131 (closer tolerances by arrangement).

→ Grades and mechanical properties